Ethylene oxide sterilizer manufacturer

EO sterilizer.Made In China

Sterilizer instructions
Contact us

Mail: sterilizerfactory@gmail.com

Contacts: Jacky Jiang

TEL: 0086 18258800889

FAX: 0086 371 55951125

ADD: Liangzhu Economic Development Zone, Hangzhou.

  • How do you decontaminate a gas mask
  • Which sterilizer cabinet is better
  • How to disinfect surgical mask
  • Safety inspection of ethylene oxide sterilizer
  • What sterilization method is used for surgical mask
  • Sterilizer instructions

    Specification of ethylene oxide sterilizer

    by:EtO sterilizer Manufactorview: 1799 time: 2020-04-03
    Specification of ethylene oxide sterilizer

    Specification of ethylene oxide sterilizer
    Cabinet volume:from 1m3 to 100m3
    Pressure range chamber supported
    Designed range: -95Kpa to +80Kpa, suggested pressure: -90Kpa to +60Kpa
     

    body (main part)for EO Sterilization

    • 1.Cabinet :stainless steel : SUS304,δ=8mm
    • 2.water jacket:rectangular steel 120*60/Q235
    • 3.housing: stainless steel
    • 4.foot:carbon Steel 14#/Q235
    • 5.foot support:steel 10#/Q235
    • 6.insulating layer:ceramic fiber
     
    door (mian part)for EO Sterilization
    • 1.door :stainless steel : SUS304,δ=8mm
    • 2.door frame:rectangular steel 120*60/Q235
    • 3.door water Jacket: U- bar carbon steel
    • 4.door seal flange :carbon Steel
    • 5.door seal way: interal air feeding
    • 6.housing:stainless steel
    • 7.insulating layer:ceramic fiber
     
    heating components (main part) for EO Sterilization
    • 1. heating water tank installing way: wall mounted
    • 2. cabinet of tank : stailess steel
    • 3. housing of tank : Carbon steel with power paint
    • 4. Electrical Equipment: stainless steel electrical heaing pipe
     
    EO vaporizer
    • 1. vaporizer installing way: wall mounted or ground based. Cusomter's decision.
    • 2.EO coil pipe:stainless steel pipe
    • 3.vaporizer housing:stainless steel
    • 4. N2 feeding function: optional , charge extra
    • 5. Rotor Flow detection function
    • 6. with vaporizer water temperature deteciton funcioin, vaporizer found gas pressure detection is
    • optional,charge extra.
    harmless exhausting system with exhaust flange joints, support future expansion,flange blind plate is carbon steel,with
    silicon pad,fan is with imported filter screen
    product loading way suggest to set the sterilier into a pit to make the cabinet bottom of the sterilizer is even to the
    ground; Pallet loading product.
     
    heating pipe:4*9kw/AC380V 3P
    vaccum pump:3.85kw/AC380V 3P/GP 50HZ
    hot water heating circulating pump:1.5Kw/AC380V 3P 50HZ
    safety valve:0.085Mpa
    steam generator:6KW/AC380V 50HZ
    air compressor:1.5Kw/AC380V 3P 50HZ
    air filter:standard fonfiguration
    EO pipe:standard fonfiguration
    EO tank joints:standard fonfiguration
    door open/close cylinder , door lock cylinder:standard fonfiguration
     
    Door Categories:
    • M:Manual Door
    • A:Pneumatic Sliding Door
    • R:Pneumatic Revolving Door
    • L:Lifting Door
    magnetic contorl box:ST-P31xxL/2N
    pneumatic valve"humidifying valve: 0.5inch screwed fitting , vacuum valve :1.5inchs screwed fitting Feeding EO valve:0.5inch screwed fitting vaporizing valve: 1inch 3 ways screwed joints
    air release valve:1 inchs screwed fitting condensate water releasing valve: 0.5inch screwed joints"

    EO electric scale:
    1、range :150Kg;
    2、material :stainless steel;
    3、support RS485 communication function;
     
    General Modele Series Control System for EO Sterilization
    temperature sensor: output form:PT100; range:-50~100℃
    pressure sensor: output form:4~20mA voltage :DC24V range:-0.1~+0.15Mpa
    mechnical gage: range: -0.1~+0.15Mpa
    humidity sensor: output form:4~20mA voltage :DC24V range :0~100%RH
    water tank pressure sensor: MIK-P300/0-6bar
    Door limit location: φ18mm/PNP/NO/DC24V
    control cabinet: integrated work station BGIB3-E0
    control module: SIEMENS S7200 PLC/SMART
    low voltage apparatus
    buttons and indicator light
    IPC(Industrial Personnal Computer): SMART IPC3000
    screen: 226V6QSB6/21'5/16:9
    printer: Deskjet M104a black/white lazer
     
    General Modele System Functions and Properties for EO Sterilization
    system control mode: Soft mannual & Full- Automatic
    open/close Door way: Sliding door
    door qty: two
    data record way: interval mode , warning triggered mode
    historical curve record way: continuous time interval mode
    data save time: 10 year(If hard drive is not damaged)
    recirculated water connector: both cabinet and door with one way in and one way out
    circulation water jacket replacement time: <5 minutes
    temperature sensor precision: display Range: 0-100℃;resolution: 0.1℃
    temperature control precision:cabinet wall temperature difference within ±5℃
    temperature control precision:cabinet inside temperature difference is within ±3℃
    pressure sensor precision: display Range : -100-+150Kpa,resolution: 0.1Kpa
    vaccum control mode: continuous mode and stepping mode ( proportional valve regulating mode is choosable)
    vaccuming time: < 30minutes  from 0 to -90KPa
    humidity sensor precision: display range: 0-100%RH(no-condensing) , resolution 0.1%RH
    control time range: 0-99hours, sterilizing time resolution 1min
    cabinet water volume auto detecting: yes ,system shows and controls the water volume and feeds water automaticly.
    steam heating connector: yes, auto control
    steam detecting: yes, displaying and warning when the steam is not enough
    vaccum pump detecting connector: yes, displaying and warning when the pressure is not enough
    steam pressure detecting connector: yes, displaying and warning when the pressure is not enough
    humidifing connector: yes ,humidifying automaticly by pulsatile mode
    humidifying way: pressure difference or sensor
    Nitrogen protection system connector: yes , auto control
    tail gas treatment connector: yes , auto control
    in-door and out-door air exhausing connector: yes , auto control
    data record and dealing mode: PC monitoring software and special data processing software for sterilization
    support recipe: mixed gas process, pure EO gas( not suggested)
    support EO gas: any kind of EO gas. Normal ones:30%EO +70%CO2 ,80%EO +20%CO2, 90%EO+10% CO2, 100% EO(work with N2); Strengthen(pay extra)type: 10%EO +90% CO2, 20%EO + 80%CO2.
    over high temperature limit protection: yes
    over high pressure limit protection: yes
    EO under low temperature limit protection: yes

    Our company provides the integrated solution of design for control system, control system, installation and after-sales service. We are committed to enhance our customer’s productivity, safety, energy conservation and cost reduction. Our main product is ethylene oxide sterilizer and auxiliary equipments, various types of automation control systems and high costeffective robot arm.
    Since 2015, our Company and Bejing Fengtai Yongding Disinfectant Factory built a strategic partnership, which is a professional ETO sterilizer manufacture. In order to improve product quality and grades faster, we have formed a professional team for R&D and service system for after-sales market, and we also establishment spererate sales department for Domestic Trade and International Trade. Beijing Fengtai Yongding sterilization plant is mainly responsible for domestic trade and sterilizer’s after-sales service, Hangzhou Bacon Mechanical and Electrical Equipments Co., Ltd is mainly responsible for international trade and electrical system service.

    Classification:Sterilizer instructions
    Recommended
    Recommended products
    Online Service
    0086 18258800889

    0086 371 55951125

    EO sterilizer
    OnlineService