Ethylene oxide sterilizer manufacturer

EO sterilizer.Made In China

Sterilizer instructions
Contact us


Contacts: Jacky Jiang


0086 18258800889

FAX: 0086 371 55951125

ADD: 51 Xiasha 22nd Street, Hangzhou, China

  • Specification configuration of ethylene oxide sterili
  • Time rate of pressure change
  • Maintenance of sterilizer
  • parametric release of sterilization
  • dry heat sterilization
  • The characteristics of the eo sterilizer
  • Sterilizer instructions

    The specifications for the sterilizer

    by: EtO sterilizer manufacturerview: 1227 time: 2020-10-29
    The specifications for the sterilizer and the sterilization process; 
    • a) IQ / OQ data;
    • b) Physical and microbiological records of the entire PQ run;
    • c) All pressure gauges and recorders have been calibrated and within the validity period.
    • d) Regulations on audit and re verification
    • e) Confirmation plan / procedure
    • f) Documented procedures used
    • g) Documented operating procedures including process control limits
    • h) If the fault occurs, the description of the problem, the corrective actions carried out and the impact on the confirmation.
    • i) In case of deviation from the scheme, details of the deviation and evaluation of the impact on the confirmation and its results.
    The purpose of this activity is to undertake and document a review of the validation data to confirm the acceptability against the approved validation procedures/protocol for the sterilization process and to approve the process specification.
    Classification:Sterilizer instructions
    Recommended products